| |
Protective untriggered gap Ð-60
Protective untriggered gap Ð-60 is designed to protect equipment from overwork in radio engineering facilities of movable and fixed equipment.
Basic electric parameters of protective untriggered gap Ð-60:
The name of the parameter, unit of measure |
Norm |
no less than |
no more than |
Puncture potential, static, kV |
2,0 |
3,3 |
Puncture potential, dynamic, kV (with the speed of voltage increase on the electrodes of the surge absorber no more than 25 kV/microsecond) |
|
12,5 |
Time of disruption lag, microsecond (with the speed of voltage increase on the electrodes of the surge absorber no less than 25 kV/microsecond) |
|
0,5 |
Static interelectrode capacitance, picofarad |
|
8 |
Dielectric resistance, Megaohm |
100 |
|
Time of reduction of resistance of discharge gap, sec |
|
0,5 |
Maintaining voltage, V
-
with maximum plate current in the impulse
-
stationary mode |
|
150
50 |
  
Instructions on the operation of protective untriggered gap Ð-60:
- While operating protective untriggered gap Ð-60 parameter points shouldn't overrate the admissible values.
-
On-position of protective untriggered gap – any position.
-
Cooling down – natural cooling.
-
Protective untriggered gap Ð-60 is fixed in the device on the cathode flange with the help of 6 screws.
|
- Ð-77
- Ð-78
- Ð-79
- P-80
- Ð-81, Ð-81-1
- Ð-125, Ð-125-1
- Ð-134, Ð-135, Ð-136, Ð-137, Ð-138
- Ð-134-1, Ð-135-1, Ð-136-1, Ð-137-1, Ð-138-1
|
|
|
|
| Top |
|
Contact
information:
tel:
+7(4912) 45-62-58
+7(4912) 21-06-13
fax:
+7(4912) 28-20-89
more detail
>>>
|
